Description
Device contains two independent H-Bridges, with over-current and short circuit protection, capable of
10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN
bus messages.
Voltage range: 6V – 28V (12V and 24V automotive installations)
Output current: 10A continuous, 30A peak
4 analogue (0-5V) / digital (35Hz – 200Hz PWM) inputs
Output PWM: 12bit 3.9kHz
Device can be used to supply protected low side (GND) or high side (VBat) supply independently to
each of 4 outputs for bidirectional DC motor control. Low side output can be PWM modulated on per
bridge basis. Common use cases can be:
Electric windows controller
High current electronic throttle body amplifier
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Voltage range: 6V – 28V (12V and 24V automotive installations)
Output current: 10A continuous, 30A peak
4 analogue (0-5V) / digital (35Hz – 200Hz PWM) inputs
Output PWM: 12bit 3.9kHz
The CAN H-Bridge device can be used to supply protected low side (GND) or high side (VBat) supply independently to each of 4 outputs for bidirectional DC motor control. Low side outputs can be PWM modulated on per-bridge basis.
Common use cases are:
Power windows
High current electronic throttle body amplifier
The dual H-Bridge device must be programmed using a CAN interface. The ECUMaster USB to CAN, Kvaser, or Peak PCAN may be used.
What’s in the box?
Can H-Bridge Module
24 Position connector with terminals
Download links:
VQ35DE Plug and Play module pinout
VQ35DE Plug and Play module external connector pinout
